10 Minute Bids
Pierce County

The local numbers behind a electrical bid.

What Pierce County builds to, and what it means for the takeoff.

Pierce County: the numbers a electrical bid depends on
WhereEnergy code climate zoneWinter design temp.
Tacoma4C29 °F
  • Winter design temperature: 29 °F (Tacoma). The heating on your plans is sized for it, and heat pumps and electric heat are a big part of the service size.
  • Energy code climate zone 4C: the energy code sets what the plans ask for in heating, hot water and ventilation, and each of those is a circuit.
  • Washington electrical work follows the 2023 National Electrical Code, with state amendments. The 2026 edition takes over on December 31, 2026.

Sources: Tacoma: City of Tacoma Ordinance No. 28957. Read 2026-09-28. Climate zones: Washington State Energy Code, Table R301.1. Every number is as the jurisdiction publishes it (its design criteria for houses, IRC Table R301.2(1)); a dash means it isn't published. Your lot can differ with elevation and exposure, so confirm it with the building department before you order.

What you get

Every device, circuit and foot of wire.

The takeoff is built from the model, device by device. Here's what it covers, with the numbers from our example house.

  • Every device placed: outlets, switches, lights, fans and appliances
  • Circuits by type: lighting, general, small appliance, dedicated
  • Cable by gauge, routed along the walls
  • The cable to buy, with 30% added for waste and routing
  • A supplier order sheet to save as a PDF and email to your supplier. See a sample

See the full electrical takeoff on an example house

Same plans, same 3D model

Every trade in Pierce County.

Add another trade to the same order: each one after the first in the same order is half price. All of Pierce County · Every area

Questions

Electrical takeoffs in Pierce County

Do you do electrical takeoffs for houses in Tacoma?

Yes. Upload the plan set for a house anywhere in Pierce County (Tacoma, Puyallup, Bonney Lake, Gig Harbor, Lakewood and University Place), or anywhere else. Nothing has to be built yet: we measure the house on the plans.

What design numbers apply in Tacoma?

Tacoma publishes energy code climate zone: 4C; winter design temp.: 29 °F. The design on your plans should match them, and the takeoff follows your plans. Elevation and exposure can change them for your lot, so confirm with the building department.

Does a takeoff cost more in Pierce County?

No. The price is the same everywhere, and you see it before you pay. The 3D model is included, and each trade after the first in the same order is half price.

Is this an exact price?

No. It's an estimate built from your plans. Plans don't show code or inspector changes, the existing service, or devices added during construction. Anything built differently from the drawings won't be in the bid. We recommend a site visit to confirm measurements and conditions before you sign a contract or order materials.