Takeoffs and bids from plans
in the Eastside.
Bellevue, Redmond, Kirkland and Medina, across Lake Washington from Seattle. Upload the plan set for a house in Bellevue, Redmond, Kirkland and Medina: we build it in 3D and measure every trade off the model. You spend about 10 minutes checking it, and it's ready to send.
Launch offer: the first 100 sign-ups get their first trade bid for $10.
One plan set, every trade.
Each trade after the first in the same order is half price. Prices are today's, and you see yours before you pay.
Metal roofing
Panels cut to length, every trim run measured. snow 15 psf (ground) · wind 110 mphShingle roofing
Squares with waste, starter, ridge cap, flashing. snow 15 psf (ground) · wind 110 mphSiding
Wall area, openings, corners and trim. wind 110 mph · climate zone 4CFraming
Every stud, plate, header and truss on a cut list. snow 15 psf (ground) · wind 110 mph · seismic D · frost 12 inElectrical
Devices, circuits and cable, room by room. climate zone 4CPlumbing
Fixtures, drain, vent and supply runs. frost 12 in · climate zone 4CPainting
Walls, trim, soffits and doors, inside and out.Flooring
Square feet by room and material, base and stairs.Finish carpentry
Doors, base, casing, shelving and cabinet runs.What the Eastside builds to.
The design numbers each jurisdiction publishes, the ones the trusses, bracing, roofing and plumbing on your plans are drawn to.
| Where | Snow load | Design wind speed | Seismic design category | Frost depth | Energy code climate zone |
|---|---|---|---|---|---|
| Redmond | 15 psf (ground) | 110 mph | D | 12 in | 4C |
Sources: Redmond: City of Redmond Residential Application Packet. Read 2026-09-28. Climate zones: Washington State Energy Code, Table R301.1. Every number is as the jurisdiction publishes it (its design criteria for houses, IRC Table R301.2(1)); a dash means it isn't published. Your lot can differ with elevation and exposure, so confirm it with the building department before you order.
Eastside towns.
Bellevue, Redmond, Kirkland, Medina. Next door: Seattle · Issaquah, Sammamish & Snoqualmie · South Snohomish County. Every area
Takeoffs in Eastside
Do you do takeoffs for houses in Bellevue?
Yes: any house in the Eastside (Bellevue, Redmond, Kirkland and Medina), and anywhere else. You upload the plan set; nothing has to be built yet.
Which trades can I order?
Metal and shingle roofing, siding, framing, electrical, plumbing, exterior and interior painting, flooring and finish carpentry, one trade or the whole house, all measured off the same 3D model.
Does it cost more in Eastside?
No. The price is the same everywhere and you see it before you pay. The 3D model is included, and each trade after the first in the same order is half price.
Have a plan set?
Send it in.
Any house in the Eastside, any trade.