10 Minute BidsMetal roofing takeoffs from plans
in Issaquah, Sammamish and the Snoqualmie Valley.
Upload the plan set for a house in Issaquah, Sammamish, Snoqualmie and North Bend. We build it in 3D and measure the metal roofing off the model, with Issaquah, Sammamish & Snoqualmie's design numbers in view. You spend about 10 minutes checking it against your plans, and it's ready to price and send.
Priced per plan setMetal roofing bid, 3D model includedMetal roofing takeoff, 3D model included
Launch offer: the first 100 sign-ups get their first trade bid for $10.
Read the video transcript
Bidding a metal roof straight off the plans? Here's how it works. Upload the plans. Within minutes we've read every sheet and you see your price. The roof in 3D: 14 planes, 2:12 to 12:12, 2,755 sq ft. 221 panels cut to length, on a cut list you can hand the shop. Every edge measured: 178 ft of eave, 164 ft of rake, 78 ft of ridge, every hip and valley.
On a mountain roof like this: 451 ft of snow brake. The roof drops away: all 4 pipe boots marked where the vent stacks come through. It lands as a parts list and a draft bid, priced off your price list. Change anything, then send. Your supplier order sheet: save it as a PDF and email it.
Every panel and piece of trim. Upload your plans at 10minutebids.com
Example house · address hidden
The local numbers behind a metal roofing bid.
What Issaquah, Sammamish and the Snoqualmie Valley builds to, and what it means for the takeoff.
| Where | Snow load | Design wind speed | Ice barrier required |
|---|---|---|---|
| King County | Varies by site: ground snow load =… | 110 mph | No |
| Issaquah | 25 in the table | 98 mph | No |
| Sammamish | 25 psf (ground) | 95 mph | No |
| Snoqualmie | — | 98 mph | — |
| North Bend | 33 psf (ground) | 100 mph | Yes |
- Snow load: 25 psf (ground) (Sammamish). The trusses, rafters and roof sheathing on your plans are designed for the snow load; if the truss notes show a different number, ask before you bid.
- Design wind speed: 110 mph (King County). Panel fastening and clip spacing follow the panel maker's tables for the wind speed.
- No ice barrier required by the local table (King County). Many roofers still run it at eaves and valleys; the roof notes on your plans decide.
Sources: King County: King County Ordinance 19485, Section 63 amending K.C.C. 16.05.040 · Issaquah: City of Issaquah Ordinance No. 3050 · Sammamish: City of Sammamish Ordinance O2024-564, Attachment A · Snoqualmie: City of Snoqualmie · North Bend: City of North Bend. Read 2026-09-28. Every number is as the jurisdiction publishes it (its design criteria for houses, IRC Table R301.2(1)); a dash means it isn't published. Your lot can differ with elevation and exposure, so confirm it with the building department before you order.
Every panel and trim run, measured.
Your bid is built from the model, not a scale ruler. Here's what it covers, with the numbers from our example house.
- Roof area by plane and by pitch
- A panel cut list: every panel cut to length
- Every trim run by part: eave, rake, ridge, hip, valley, step and headwall flashing
- Pipe boots, roof vents and gutter runs, counted
- A supplier order sheet to save as a PDF and email to your supplier. See a sample
Every trade in Issaquah, Sammamish and the Snoqualmie Valley.
Add another trade to the same order: each one after the first in the same order is half price. All of Issaquah, Sammamish & Snoqualmie · Every area
Other trades
Metal roofing nearby
Metal roofing takeoffs in Issaquah, Sammamish & Snoqualmie
Do you do metal roofing takeoffs for houses in Issaquah?
Yes. Upload the plan set for a house anywhere in Issaquah, Sammamish and the Snoqualmie Valley (Issaquah, Sammamish, Snoqualmie, North Bend and Fall City), or anywhere else. Nothing has to be built yet: we measure the house on the plans.
What design numbers apply in Issaquah?
Issaquah publishes snow load: 25 in the table; design wind speed: 98 mph; ice barrier required: no. The design on your plans should match them, and the takeoff follows your plans. Elevation and exposure can change them for your lot, so confirm with the building department.
Does a takeoff cost more in Issaquah, Sammamish & Snoqualmie?
No. The price is the same everywhere, and you see it before you pay. The 3D model is included, and each trade after the first in the same order is half price.
Is this an exact price?
No. It's an estimate built from your plans. Plans don't show the roof as it really is: rot or old layers under a re-roof, or crickets and saddles that aren't drawn. Anything built differently from the drawings won't be in the bid. We recommend a site visit to confirm measurements and conditions before you sign a contract or order materials.
Have a plan set?
Send it in.
Any house in Issaquah, Sammamish and the Snoqualmie Valley. The 3D model and the takeoff come off your own plans.