10 Minute BidsTakeoffs and bids from plans
in Skagit County.
The Skagit Valley, from Anacortes on Fidalgo Island to Mount Vernon, Burlington and Sedro-Woolley. Upload the plan set for a house in Mount Vernon, Burlington, Anacortes and Sedro-Woolley: we build it in 3D and measure every trade off the model. You spend about 10 minutes checking it, and it's ready to send.
Launch offer: the first 100 sign-ups get their first trade bid for $10.
One plan set, every trade.
Each trade after the first in the same order is half price. Prices are today's, and you see yours before you pay.
Metal roofing
Panels cut to length, every trim run measured. snow 25 psf (ground) · wind 110 mph · ice barrier NoShingle roofing
Squares with waste, starter, ridge cap, flashing. snow 25 psf (ground) · wind 110 mph · ice barrier NoSiding
Wall area, openings, corners and trim. wind 110 mph · climate zone 4CFraming
Every stud, plate, header and truss on a cut list. snow 25 psf (ground) · wind 110 mph · seismic D1 · frost 12 inElectrical
Devices, circuits and cable, room by room. climate zone 4C · winter design 22 °FPlumbing
Fixtures, drain, vent and supply runs. frost 12 in · winter design 22 °F · climate zone 4CPainting
Walls, trim, soffits and doors, inside and out.Flooring
Square feet by room and material, base and stairs.Finish carpentry
Doors, base, casing, shelving and cabinet runs.What Skagit County builds to.
The design numbers each jurisdiction publishes, the ones the trusses, bracing, roofing and plumbing on your plans are drawn to.
| Where | Snow load | Design wind speed | Seismic design category | Frost depth | Ice barrier required | Winter design temp. | Energy code climate zone |
|---|---|---|---|---|---|---|---|
| Skagit County | By mapped zone: 25 (roof) | — | D1 | 12 in | — | — | 4C |
| Mount Vernon | 25 psf (ground) | 110 mph | D1 | 12 in | No | 22 °F | 4C |
Sources: Skagit County: Skagit County GIS · Mount Vernon: City of Mount Vernon. Read 2026-09-28. Climate zones: Washington State Energy Code, Table R301.1. Every number is as the jurisdiction publishes it (its design criteria for houses, IRC Table R301.2(1)); a dash means it isn't published. Your lot can differ with elevation and exposure, so confirm it with the building department before you order.
Skagit County towns.
Mount Vernon, Burlington, Anacortes, Sedro-Woolley, La Conner, Bow. Next door: Whatcom County · Whidbey & Camano · Everett & north Snohomish. Every area
Takeoffs in Skagit County
Do you do takeoffs for houses in Mount Vernon?
Yes: any house in Skagit County (Mount Vernon, Burlington, Anacortes, Sedro-Woolley, La Conner and Bow), and anywhere else. You upload the plan set; nothing has to be built yet.
Which trades can I order?
Metal and shingle roofing, siding, framing, electrical, plumbing, exterior and interior painting, flooring and finish carpentry, one trade or the whole house, all measured off the same 3D model.
Does it cost more in Skagit County?
No. The price is the same everywhere and you see it before you pay. The 3D model is included, and each trade after the first in the same order is half price.
Have a plan set?
Send it in.
Any house in Skagit County, any trade.